[ Services ]

Steel Slitting: Avoiding Potential Problems

Steel slitting, also known as rolled steel slitting is a manufacturing process where metals with wide coils are basically fed through a slitter lengthwise in order to be cut down into smaller and narrower coils. These coils can be made in different sizes ranging from a capacity of 8” up to 36”, so you can choose what size, width and capacity of coil that you need and the slitter will do it for you.

The process involves the metal coil to run through the upper and lower circular blades that are present in the slitter. They are more commonly referred to as knives and these blades are sharp enough to create smooth metal strips. A god setup that involves making sure that every part of the machine is set up correctly, using good quality, sharp knives and balancing the recoil, uncoil tension are all key to ensure a good job. If you have issues in the setup or in the quality of the knives being used, you will notice a few problems in your output like visible knife marks on the metal, edge burr, bad edge quality, edge waves and the width of the metal being out of the specified size/width/diameter etc.

Sometimes these problems are allocated to poor quality of the metal that was used, other times, like I mentioned above, there might be a problem with your setup or materials. In order to make sure that you get perfect results every single time, if you are working with steel coil slitting & toll-slitting, you need to make sure that you identify and know of any possible variable that can affect the process and results, and then make sure to control every one of those variables enough to get the right output every time, because if you are not taking care of things in a controlled setting, you will not get the results you want.

[ Services ]

How to Find a Professional Company to Redesign Your Kitchen

If you have decided to redo your kitchen then you need to browse through this article as it would give you knowledge that will help you participate and make better decision about your kitchen renovations. Kitchens are important which is why it is necessary that you remain involved throughout the process and make the necessary decisions when needed. There are some experts at designing small kitchens but when you are searching to hire a company to redo your kitchen, you cannot just jump the bandwagon and hire a company because they advertise a lot, you should be concerned about their skill and try to find out about the quality of their services and not be affected by their marketing schemes.

Previous Projects

If you want to know the quality of services of a kitchen designing company, you need to dig out all of their old projects. You can do that by asking the company directly to show their catalog and you can search the internet too and when you adopt both of these ways, you would be able to make a technical and honest judgment.

Previous Clients

If the company is well-known, it would not be hard to find its previous clients because you can just go on the internet and search for reviews of the particular company and you will have plenty of information from the testimonials of different people. If you have specific questions about the company or its services then you will need to find forums or threads where you can ask the previous clients direct questions.

Ratings

If you get lucky, you might be able to find the ratings of the company that you plan to hire but you would need to do a thorough research online.